Our Curated Collection:

Burton Men's Ruler BOA Wide Snowboard Boots - 214261

Product Details

Dial In, Time-Honored Performance With a legacy of pushing personal skills to the pro level, the men's Burton Ruler Snowboard Boots are the choice for stepping to larger drops, hitting burlier features, and pushing your skills. The ability to independently dial in the tension between the upper and forefoot lets you fine tune the fit and feel to match your ambitions. Their proven formula creates a medium stiff, responsive feel that's equally nimble and powerful. Warm feet and a custom fit keep you riding longer and thinking about your feet less. Heat-moldable liners brings it all together with a custom fit and the enhanced warmth of heat-reflective tech to keep you out on the hill where you want to be.

Supportive and Responsive

• Plenty of support and responsive feel give you that extra edge to go for it.
• Adjustable Fit Secure, Comfortable Fit, Warm, Dry Feet
• Lightweight, heat-moldable liners offer a custom fit with the tech to reflect heat and wick sweat to keep your feet warm and dry all day, all season.

Features:

LACING:

Dual Zone Boa®

Dual-Zone BOA® Fit System with Coiler™ technology features two distinct lace zones that can be independently adjusted with the twist of a dial for a custom fit in both the upper and lower portions of the boot.

Boa Coiler Closure System Powered by Burton Exclusive New England Ropes

New England Ropes use American-made fibers and are virtually indestructible, won't kink, and are easy to re-lace

LINER:

Imprint™ 2 with Lock-Up Cuff

heat-moldable liner features 3M™ Thinsulate™ insulation for additional low-bulk warmth along with hook-and-loop closure for a snug fit.

This super low-profile inner cuff carries the laces around the ankle for consistent and secure heel hold with effortless entry and exit.

CUSHIONING

Burton Recycled Content Rubber with Sleeping Bag Reflective Foil

This low profile and lightweight underfoot shield reflect heats back to the feet, improving both warmth and comfort when faced with cold conditions.

3M™ Thinsulate™

EST 0mm Heel Rise

EST goes beyond bindings by drawing inspiration from the surf / skate heritage of snowboarding and giving you a more direct connection to your boards.

By eliminating the ramp angle of your outsole, EST Lowers your center of gravity, improves board feel, and creates a more surf/skate like feel. All without sacrificing an ounce of cushioning thanks to ultra dampening ReBounce and B3 Gel inserts.

FLEX AND RESPONSE:

Responsive, Medium Stiff Feel Flex A not too stiff, not too soft flex means you can push your skills without being pushed around.

1:1 firm flex PowerUp tongue creates a snug fit between boot and tongue, eliminating the need to readjust while you ride

GripLITE backstay snugs up the fit between the boot and hi-back for direct energy transfer and reduced rider fatigue

COMFORT:

Total Comfort Construction Shrinkage

Footprint Reduction Technology

Snow-Proof Internal Gusset

Molded EVA Footbed

Riding Level

Intermediate-Advanced

Warranty:

1-YEAR WARRANTY

Pros of BOA®

Lacing It is easy to fine-tune tightness with micro-adjustments

Pop out the coiler for quick and easy comfort on the lift or during après

All boot adjustments can be made while wearing gloves/mittens

A single-coiler system tightens and loosens evenly across the entire foot

Cons of BOA® Lacing

The coiler interface may take a couple of uses before it feels intuitive

It can be easy to over-tighten with BOA® and cause foot fatigue

A single-coiler system does not allow for independent tightness of the upper and lower zones

The BOA® coiler sticks off the boot and can get caught on things

Replacing a broken coiler or cable requires additional parts and can be complicated 

BOA® lacing snowboard boots are generally more expensive

TNT Cable Lock
Burton Part Number: 108021

Houdini-proof.

• Pocket-Friendly, Compact Shape
• Compact 30" [76CM] Steel Cable Lock
• Three-Number Combination

F4-75C GLIDE WAX PASTE, 75ML

F4 Universal All Temperature Paste wax on tube. For skis and snowboards. All snow conditions. With foam applicator. Apply and go!

Special tip: Use F4 Combi Brush (T0166B). Polish with the felt and then brush lightly.

Based upon "Future Cera® raw materials, which grant for high quality and an environmentally friendly profile.

Kit for ski prepping. Diamond stone for polishing as well as coarse stone for grinding edges. Ski brake retainers included.

• Make sure you always have sharp steel edges on your skis
• The set contains everything you need for an extra good day on the slopes or in the mountains
• Practical pocket format that allows you to take the file with you on the slopes

FEATURES:

6 piece ratchet driver #2 and #3 phillips #3 pozidrive 3/32" hex 1/4" flat head 8mm and 10mm wrench Sold in 6 packs

Burton Men's Genesis Re:Flex Snowboard Bindings - 105471

Product Details:

High Performance, Full Comfort

Supercharge your suspension for a responsive ride with the men's Burton Genesis Re:Flex Snowboard Bindings.

A little softer than our stiffest bindings and loaded with cushioning, the Genesis is made for full days on the mountain where comfort is key.

They offer a boot-hugging fit and reduced vibration for riders that push their gear and their riding.

They've got the full cushioning to match for less fatigue and more riding. Available in two models, mount the EST® version to a board with The Channel® for ultimate flex, feel, and adjustability, or go with Re:Flex and choose any board in the shop.

Riding Level

Intermediate - Expert

Mounting:

Re:Flex™

Re:Flex mounting system dramatically improves board flex and feel while also reducing weight and is compatible with all board mounting options.

Universal Compatibility

Re:Flex baseplates are universally compatible with all major mounting systems.

Universally compatible with all current snowboard mounting systems, including 4x4, 3D®, and The Channel®

Cushioned Comfort

FullBED 

cushioning system provides full underfoot cushioning, maximizing comfort while minimizing fatigue, and features a trap door design for easy-access to mounting hardware

Durable, All-Conditions Cushioning 

B3 gel cushioning maintains comfort and dampening through a wide range of temps and long term use.

Hi-Back:

Kickback Hammock

Hi-back is a combination of internal spring tension between the molded hammock and the hi-back frame for increased response and reduced vibration and comfort. 

Our standard hi-back provides consistent flex and features durable bomb-proof materials and foam padding for elevated comfort.

Nylon composite material blended with 30% short-glass provides playful response Increased Response Kickback Hammock hi-back suspends your heel for increased response and reduced vibration.

DialFLAD™

DialFLAD system with Living Hinge features a rotating dial for making adjustments to the forward lean angle of the hi-back based on the preference of the user, getting an active and quicker response with more forward lean and a more relaxed response with less forward lean.

Adjustable Lean

DialFLAD system lets you adjust the forward lean angle of the hi-back with the turn of dial.

Fully Adjustable Hi-Back

Living Hinge Hi-Back reduces hardware and weight, allowing for independent adjustment of your forward lean and hi-back rotation.

Single-component canted hi-back construction provides immediate response and allows you to manipulate the overall flex profile of the board;

Zero forward lean hi-back is completely vertical and designed for riders who prefer a more playful and relaxed feel

Baseplate Materials

30% Short-Glass/Nylon Composite

Buckles:

Double Take Buckles

feature dual-sided tongue teeth to help support quicker engagement and provide faster tongue uptake so it takes fewer cranks to tighten your straps, vastly improving strength, speed, and ease-of-use..

feature aluminum levers and a steel base for strength with a polycarbonate barrel for improved ratchet tongue life

Quick to Adjust Double Take Buckles 

take fewer cranks to tighten your straps and offer long-term durability.

Straps:

Supergrip Capstrap™ 2.0 toe strap

wraps over the toebox of the boot and is fully injected to reduce waste

Hammockstrap 2.0 ankle strap 

as a minimized construction that is ultra responsive, conforming to any boot;

Warranty:

1-YEAR WARRANTY

All Burton binding baseplates are backed by a LIFETIME WARRANTY and Burton straps and hi-backs are backed by a one-year warranty from date of purchase.

Please note the 3D Hinge Disc (not included) is needed for mounting on 3D systems.

3D pattern systems are found on Burton boards manufactured prior to 2014.

Dry N' Warm Ski Boot Heaters /

Dry out your soggy boots for tomorrow's bluebird day. The Happy Feet Dry n' Warm Boot Dryer and Warmer will dry your boots out overnight and make 'em toasty-warm so they're a pleasure to put on. Ski, snowboard, nordic, wetsuit booties, waders, or just cold, wet boots or shoes -- they'll warm up in under an hour, or dry overnight. The Dry-n-warm system uses convective heat to thoroughly dry and warm (hence the name) from the inside out -- safely.

Features / Tech:

• AC 110 volts -- plugs into any wall outlet
• No moving parts
• Convective heat dries without risk of heat damage
• Dries in a few hours, warms in a few minutes.

Sidas Winter 3Feet Merino Footbed (Low)

Anatomical insoles adapted low-arched foot. Ideal hybrid top cover : synthetics fibers (40%) will guarantee resistance and durability, the merino wool (60%) will reduce odor and assure an optimal thermoregulation.

• Hybrid Merino top cover: Thermoregulation & Absorbs odors
• Eva shell low arch shape: foot support & pressure distribution
• Aluminum layer: Insulation
• EVA PAD: Heel cushioning

Dakine Boot Locker 69L

There is no simpler solution to keeping your whole winter kit together and ready to go. The Boot Locker offers tons of volume up top for jackets, extra layers, spare gloves and a helmet, while the tarp-lined bottom compartment is great at keeping your boots warm and dry on the way up the mountain and separate from everything else on the way down.

Features: 

• Split level organization keeps clothes separate from boots
• Tarp lined boot compartment doubles as changing matt
• Removable webbing shoulder strap
• 4200 cubic inches [ 69L ]
• 20 x 15 x 14 [ 51 x 38 x 36cm ]
• 2.4 lbs. [ 1.1 kg ]

Crab Grab Mini Shark Teeth

SMALL PAD. BIG BITE.
This is the mini version of our best selling spiky traction. Same size teeth (just fewer of them) for those who want maximum grip for minimum dough.

* 1 per pack
* 12 Spikes
* Dimensions: 2.9” x 3.7”

TECHNOLOGIES:
* SHARK TOOTH SPIKES™ - Ovular spikes modeled after nature’s best bite.
* CRUBBER™ - Our flexible rubbery replacement to the stomp pads of yesteryear.
* EASY CUT GROOVES™ - Flex with your board to let it bend naturally, and easy to cut and spread out your spikes.

TNT Collector’s Edition Board Wall Mounts
Burton Part Number: 135031

Turn your walls into a snowboard museum.

• Three-Point Mounting System Fits Any Snowboard
• Brushed Aluminum Base
• Mounts to Any Flat Surface
• Mounting Hardware and Instructions Included

2025 Men's Burton Free Thinker Snowboard - 132191>

Product Details

Open the Door to Possibility

The men's Burton Free Thinker Snowboard is a true twin spin on Danny Davis' go-to, built for hot laps in the park, pipe, or mobbing side hits across the mountain.

True twin symmetry opens up the possibilities for creative expression in any direction, while the control of camber keeps it quick and poppy.

Terrain

All Mountain, Freeride, Freestyle

Rocker Type

Camber

• Powerful and Precise
• A Camber Bend advocates powerful turns and poppy precision, offering snappy suspension with weight distributed evenly across the entire board for smooth, continuous edge control from tip to tail

Rocker Profile

(Camber)

Flex

Stiff

Flex Rating

7 out of 10 (1 Soft - 10 Stiff)

Shape

True Twin Freedom

• Twin Shape and flex are perfectly symmetrical for a balanced ride that lets you spin and stomp as you like, regular or switch

Riding Level

Expert

Taper

0

Core

Super Fly II™ 700G Core

• Stronger and lighter woods target specific areas of the core to provide pop, strength, and reduced weight.

Dualzone™ EGD™

• The wood grain is positioned along the toe and heel edges on two continuous zones, perpendicular to the rest of the wood core for consistent edge-hold and added strength.
• 
  Lightweight and Full of Energy
• The carbon-reinforced fiberglass core matrix creates a stiff, fine-tuned flex feel that's loaded with energy.

Sustainability

Super Sap® Epoxy

• A resin formulated with bio-based materials that reduces the carbon footprint by 50% over conventional all-petroleum-based epoxies.
• Less oil consumption means even less of a carbon footprint per board

Fiberglass

45° Carbon Highlights High Voltage

• Carbon Highlights optimizes each layer of the fiberglass matrix and adds a full tip-to-tail carbon layer to reduce weight and fine tune torsional feel to achieve different ride characteristics.
• A 60° fiber angle creates a highly maneuverable and playful feel, while a 45° fiber angle provides a more aggressive ride.

Base

Sintered WFO

• Sintered Base is durable and highly porous, providing added durability and superior wax absorption for greater overall glide

Additional Features

Pro-Tip™

• A tapered tip and tail thickness reduces swing weight for easier mobility.

Infinite Ride™

• This Burton-exclusive technology allows maximized pop and strength by overbuilding the board, then putting it in a machine that breaks in the board for you.
• Whether you choose to ride Flat Top, Flying V™, or Camber, rest assured that with Infinite Ride™ your board will maintain its flex, pop, and feel from the first day forward, season after season.

Factory Tuned

• Board comes waxed and ready for the mountain right from the factory.

Warranty

3-YEAR WARRANTY

• All 2014 and newer Burton snowboards with The Channel mounting system (such as the one you are looking at here) are backed by a three-year warranty from date of purchase.

Binding Compatibility

The Channel®

• Board Mount is compatible with all major bindings and lets you dial in the stance exactly the way you like it.

Channel Inserts Included in Box

• Channel Inserts are required to mount your bindings.
• Inspect packaging before recycling the box.

Grabber Cold Weather Foot Warmers

This non-toxic, environmentally friendly, odorless heat source uses all-natural ingredients that are non-combustible. Built to warm your entire foot, the Grabber Foot Warmer is designed in the shape of a shoe or boot insert.

HOW TO USE COLD WEATHER FOOT WARMERS:

Simply open the outer package and immediately place both insoles into any pair of closed-toe shoes, winter boots, Ski Boots or Snowboard Boots. Foot Warmers are specifically designed for use inside a shoe or boot where oxygen is restricted. Do not use in ventilated type footwear. For best results, insert each insole forward towards the toe of the shoe or boot. No trimming. No peeling. Fabric side up, white side down.

SIZING:

S/M: Women Shoe size 5-8 / Men Shoe size 4-7

M/L: Women Shoe size 9+ / Men Shoe size 8+

OTHER INFO:

Avg. temp. 95F (35C), max. temp. 102F (39C) when used as directed. Each package contains 2 Warmers.

Men's Burton Midweight Emblem Socks - 100681

Support Your Feet

Cars, food, art. The Italians do it better, or so the T-shirt says. Well, you can add socks to the list, too. The men's Burton Midweight Emblem Socks aren't just made in Italy, they're quick-drying, stink-resistant and all-day-comfy.

• Made for Riding: Reinforced in all the right places with the stretch to keep them in place, no matter what you're up to.
• Stink-Free Warmth: A quick-drying, odor-resistant knit ensures your feet are warm, dry, and perfectly pleasant.
• Warranty: Lifetime warranty
• Part #: 100681